Hi folks. Does anyone out there have any info on setting PRV's /replacing main hyd pump/rebuilding same..... My old girl is a little weary in the hyd. department, and I would like to rectify this, but with workshop manuals slightly less common than peace in Syria, it's a bit of a challenge. Before binning the existing pump, I need to ascertain that it is the pump thats tired, not an incorrect setting on a PRV or a stuck valve etc. Its a triple pump with three test ports, does it need three gauges at the same time, or can I test each section seperately....... any and all info on the machine will be welcomed.
Cheers,
Pete
JCB 805bt
-
Topic author - Posts: 29
- Joined: Sat Nov 21, 2009 10:55 pm
- Real name: Peter
- Location: Herts
-
- Posts: 15
- Joined: Sat Feb 27, 2016 6:31 pm
- Real name: tom mc laughlin
- Been thanked: 4 times
- Flag:
Re: JCB 805bt
you would be better flow testing pumps first,i have a manual i will have to look for it tomorrow
Who is online
Users browsing this forum: No registered users and 15 guests