Andy I will be speaking to Tony Flint tomorrow so I will ask him then.
Jeremy
New owner of Hymac 580B
-
Jeremy Rowland
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
-
Andy80
Topic author - Posts: 100
- Joined: Wed Nov 08, 2017 7:22 pm
- Real name: Håkan
- Has thanked: 45 times
- Been thanked: 25 times
- Flag:
Re: New owner of Hymac 580B
Yes i had filled it up to the correct level according to the manual 
But the rain made the level to high after a while.
Today Diana had to work for me. She runs so smoothly and fine, Words can not describe how glad i am that the engine seems to be fine after the incident
But the rain made the level to high after a while.Today Diana had to work for me. She runs so smoothly and fine, Words can not describe how glad i am that the engine seems to be fine after the incident
You do not have the required permissions to view the files attached to this post.
-
Andy80
Topic author - Posts: 100
- Joined: Wed Nov 08, 2017 7:22 pm
- Real name: Håkan
- Has thanked: 45 times
- Been thanked: 25 times
- Flag:
Re: New owner of Hymac 580B
Compering pictures between your BT and my B i can see yours has more cover in front of the aria where the air filter is located, maybe this is why you don't get water in there Jeremy.
You do not have the required permissions to view the files attached to this post.
-
Jeremy Rowland
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
Re: New owner of Hymac 580B
Yes it does appear that way I will see what I can find out from Tony Flint.
Jeremy
Jeremy
-
Jeremy Rowland
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
Re: New owner of Hymac 580B
Andy80 wrote:Compering pictures between your BT and my B i can see yours has more cover in front of the aria where the air filter is located, maybe this is why you don't get water in there Jeremy.
112_3I2EWG7IJYQSS1567795948.jpgNamnlös.png
Well Andy you are correct
Tony Flint said that this was an issue they had with some machines and the answer was the re-designed engine canopy like on my machine so you have your answer there. Jeremy
-
Andy80
Topic author - Posts: 100
- Joined: Wed Nov 08, 2017 7:22 pm
- Real name: Håkan
- Has thanked: 45 times
- Been thanked: 25 times
- Flag:
Re: New owner of Hymac 580B
That was very interesting to hear Jeremy Did Tony hear of any engine damage caused of this?
I think i will cover up the intake area to solve this problem on my machine
Did Tony hear of any engine damage caused of this?I think i will cover up the intake area to solve this problem on my machine
-
Andy80
Topic author - Posts: 100
- Joined: Wed Nov 08, 2017 7:22 pm
- Real name: Håkan
- Has thanked: 45 times
- Been thanked: 25 times
- Flag:
Re: New owner of Hymac 580B
Earlier in this summer i had some of the bigger hydraulic houses changed. One problem during this was the screw connector on the hydraulic pipe that seemed to be soldered.
When dismantling the houses the soldering broke lose, not the thread. The solution was to dismantle the hydraulic pipe and weld the screw connector in place again, red arrow.
When dismantling the houses the soldering broke lose, not the thread. The solution was to dismantle the hydraulic pipe and weld the screw connector in place again, red arrow.
You do not have the required permissions to view the files attached to this post.
Last edited by Andy80 on Sun Sep 22, 2019 1:21 pm, edited 1 time in total.
-
Jeremy Rowland
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
Re: New owner of Hymac 580B
Hi Andy, yes he did hear of some engines getting water in the air-filter and becoming damaged through being water locked.
When I was changing the large hydraulic hoses at the bottom of the boom I had the same problem that you did, the solder broke on the one so I got it welded back on at work and it has been perfect ever since.
I have been working on my machine today I will post some photos when I get the chance.
Jeremy
When I was changing the large hydraulic hoses at the bottom of the boom I had the same problem that you did, the solder broke on the one so I got it welded back on at work and it has been perfect ever since.
I have been working on my machine today I will post some photos when I get the chance.
Jeremy
-
Andy80
Topic author - Posts: 100
- Joined: Wed Nov 08, 2017 7:22 pm
- Real name: Håkan
- Has thanked: 45 times
- Been thanked: 25 times
- Flag:
Re: New owner of Hymac 580B
Suddenly the right track stoped tracking.
I removed the cover over the chaindrive and found that the drivesprocket rotates normaly when the hydrauldrive is activated. But the big drivewheel in the trackpads are standing still.
And with tha chain removed i can rotate the shaft by hand. That leeds me to suspect a broken drive shaft.
Where can i get an other one?
I removed the cover over the chaindrive and found that the drivesprocket rotates normaly when the hydrauldrive is activated. But the big drivewheel in the trackpads are standing still.
And with tha chain removed i can rotate the shaft by hand. That leeds me to suspect a broken drive shaft.
Where can i get an other one?
Who is online
Users browsing this forum: No registered users and 17 guests