Welcome to the new version of CMN!
Some help showing the new functions How-To

How-to: Browsing the forum effectively

JCB 3cIII gear box Help

Discuss excavators here

Topic author
Tim_tregear
Posts: 1
Joined: Sun Nov 26, 2017 11:41 pm
Real name: Tim
Flag: Great Britain

JCB 3cIII gear box Help

Post #1 by Tim_tregear » Mon Nov 27, 2017 1:48 pm

Hi All, just registered with this site as there seems to be some really knowledgable people on here and I am struggling to find any info on a google search.

I have recently purchased an old 3cIII late 70's i guess. It is the model with the torque converter. When I select fwd or reverse it takes a fair while for the gear to engage, then once engaged it will sometimes drop out of gear once it has started moving. I am guessing this is due to oil pressure or lack of oil. Can any one guide me on how this system actually works, is it a seperate hydraulic system for the drive? and if so where is the fill. I have a pipe that connects to the gear box that comes up in the cab floor. Like I say I have tried to download manuals etc but can find very little. Any help would be greatly appreciated.

Thanks , Tim


Jeremy Rowland
Moderator
Posts: 6773
Joined: Sun Aug 05, 2007 8:36 pm
Real name: Jeremy Rowland
Has thanked: 1019 times
Been thanked: 794 times

Re: JCB 3cIII gear box Help

Post #2 by Jeremy Rowland » Mon Nov 27, 2017 2:48 pm

Hi Tim and welcome :wave: there should be somebody on here who can offer you advice; it does sound like you have an oil shortage in the transmission perhaps the torque converter and the gearbox?

Jeremy


philwheelton
Posts: 275
Joined: Sun Nov 06, 2011 2:09 am
Real name: phil wheelton
Has thanked: 1 time
Been thanked: 26 times
Flag: Great Britain

Re: JCB 3cIII gear box Help

Post #3 by philwheelton » Tue Nov 28, 2017 12:37 am

Hi Tim you have a 3c mk2 with a Brockhouse 11N torque converter forward reverse unit , when you put them into drive they take a couple of seconds to take up the drive , this is built in to them , does the drive in the gear box jump out or does the f/r unit loose drive ?
the oil filler is in the floor , the dip stick is in the plate across the front and it needs dipping with the engine running, the system is a stand alone unit the pump is part of the steering pump on the right hand side of the engine just above the chassis , it should run on ATF fluid , hope this is of help to you . Phil


Return to “Excavators”

Who is online

Users browsing this forum: No registered users and 4 guests