New Members - please introduce yourself
-
- Posts: 3
- Joined: Thu Oct 12, 2017 8:34 pm
- Real name: Vasilis
- Has thanked: 10 times
- Flag:
Re: New Members - please introduce yourself
Hello to all,
I am Vasilis from Greece and just bought a JCB 3CX (3D) around 1985
I am Vasilis from Greece and just bought a JCB 3CX (3D) around 1985
-
- Moderator
- Posts: 7205
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1182 times
- Been thanked: 996 times
Re: New Members - please introduce yourself
Hi from Devon.
My name is Tim and I have just purchased a 1959 JCB Hydra Digga, it had not been run for about 4 years, after stripping down the diesel pump, the fault was traced to the stop plunger in the off position. it’s now up and running and moved inside a unit.
Also the hydraulics work but 2 of the Rams need refurbishing as the spindles are rusty. If any one has any technical information about this unit, it would be appreciated as I am a newbie and any help would b3 appreciated. The photograph showes the JCB inside the workshop.

My name is Tim and I have just purchased a 1959 JCB Hydra Digga, it had not been run for about 4 years, after stripping down the diesel pump, the fault was traced to the stop plunger in the off position. it’s now up and running and moved inside a unit.
Also the hydraulics work but 2 of the Rams need refurbishing as the spindles are rusty. If any one has any technical information about this unit, it would be appreciated as I am a newbie and any help would b3 appreciated. The photograph showes the JCB inside the workshop.

-
- Posts: 2736
- Joined: Fri Jul 13, 2007 12:43 am
- Real name: essexpete
- Has thanked: 473 times
- Been thanked: 294 times
Re: New Members - please introduce yourself
Hi There
The front end looks like JCB's conversion on the Major but the back hoe or digger does not look JCB to me. Perhaps some others cna have a look and pass their opinions?
The front end looks like JCB's conversion on the Major but the back hoe or digger does not look JCB to me. Perhaps some others cna have a look and pass their opinions?
-
- Moderator
- Posts: 7205
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1182 times
- Been thanked: 996 times
Re: New Members - please introduce yourself
essexpete wrote:Hi There
The front end looks like JCB's conversion on the Major but the back hoe or digger does not look JCB to me. Perhaps some others cna have a look and pass their opinions?
Firstly hi Tim and welcome to CMN

Jeremy
Re: New Members - please introduce yourself
Re Back hoe, to be honest I do not know, but attached is a better photograph.


Return to “Member Introductions”
Who is online
Users browsing this forum: No registered users and 1 guest