David Brown Trackmaster Crawler

Discuss dozers here
User avatar

modelman093
Posts: 646
Joined: Wed Jan 23, 2008 12:18 am
Real name: Angus Shapland
Has thanked: 8 times
Been thanked: 72 times
Flag: Great Britain

Re: David Brown Trackmaster Crawler

Post #11 by modelman093 » Thu Jan 28, 2021 1:05 am

You've done the old girl proud - thanks for sharing.

User avatar

Topic author
RUSTY_RELICS
Posts: 46
Joined: Fri May 14, 2010 10:29 pm
Real name: Carl Hargreaves
Location: Lancashire
Has thanked: 34 times
Been thanked: 24 times
Flag: Great Britain

Re: David Brown Trackmaster Crawler

Post #12 by RUSTY_RELICS » Sun Jan 31, 2021 8:58 pm

Evening all,

I've been fitting a few new parts to the 30TD, Fan belt, oil and diesel filters, also a new diaphram to the injector pump. I have done quite a bit of pannel beating this afternoon.
I forgot to mention, The 30TD, has one really good track and one not so good track, with the pins just about to show through the bushings.
If anyone knows of a decent track available for a David Brown 30TD. I be grateful to hear from you

Thanks,
Carl Hargreaves


Image

User avatar

Topic author
RUSTY_RELICS
Posts: 46
Joined: Fri May 14, 2010 10:29 pm
Real name: Carl Hargreaves
Location: Lancashire
Has thanked: 34 times
Been thanked: 24 times
Flag: Great Britain

Re: David Brown Trackmaster Crawler

Post #13 by RUSTY_RELICS » Fri Mar 05, 2021 10:55 pm

Here is a video on the 30TD, the fuel rack in the pump was sticking in the mid way position (better than the FLAT OUT position)
Where the vacuum pipes come from the inlet manifold, someone had bunged them up by using excessive universal blue instant gasket. Rendering them ineffective.
Anyhow the diaphragm was replaced seen as I had ordered one anyway
Thanks,
Carl Hargreaves



Jeremy Rowland
Moderator
Posts: 8667
Joined: Sun Aug 05, 2007 8:36 pm
Real name: Jeremy Rowland
Has thanked: 1867 times
Been thanked: 1688 times

Re: David Brown Trackmaster Crawler

Post #14 by Jeremy Rowland » Fri Mar 05, 2021 11:50 pm

Nice one Carl :claphands: :thumbup: sounds well to me.

Jeremy


Return to “Dozers”

Who is online

Users browsing this forum: No registered users and 9 guests