5110b 90m demolition rig

[hrdemo]

sorry but the one we had said SK1100 on the side!!!

Strange as the speclogs all say it is a SK1000DW. We are speaking about the same machine I hope (the brown one > ex. Nabekai).

About the Cat 5110B TUHD90-5 the machine is still under final reparations and then it's final paintjob. I will keep you guys updated when and were it's going.
gr,

[john345me]

yeah the 850 i drive is a dream to drive mine you working full reach at 52m had the lift shaft turn and some how got stuck too the jaw tracked back to drag it off the roof so the weight of it would fall out the jaw worked thank god !!!!!!!1

[gaz485]

i'm sure the 5110 is out working, taking some high tanks down?

[john345me]

yeah someone sent the link to the picks of it taking down the tanks!!!!!!!!1

[hrdemo]

i'm sure the 5110 is out working, taking some high tanks down?

Shure ????
And what machine is it then you think I'm looking at, inside Rusch Buildings in Zwaag!!!!
Tankjob at Shell Botlek is more then a month old. AND THE MACHINE IS IN REPAIRMENT

[TUHD]

The 90m is working again. He's working at a tank terminal to demolish a 62 meter building. Their own cat 395c TUHD was to small and also safety is very important. So they rent the cat 5110B TUHD. It's not from Euro Demolition anymore. It's for all companies good they can test it, and after some small problems it's working very good.

The machine is still in cat colours, but the machine is photoshopped. More pics from the machine and assembly in a short time on our website www.highreachdemolition.com

[TUHD]

The machine is know the Cat 5110B HRD 88. It is completely modified and nothing Rusch anymore. Only the telescopic sections is original and one stick. The latest stick is also complete new rebuild. It has done succesfully a big powerplant demolition in Belgium and machine is now available over http://www.mqpglobal.com.

In belgium it has worked with 10 tons Dehaco DSS 950R scrap shear.

[TUHD]

The machine recently demolished a big powerplant in Belgium and worked with 10 tons scrap shear.

[Dah]

I imagine that you get a huge amount of sway on the end don't you?

Do they have cameras on the business end?