Thought Id better start my own thread for this but does anyone know where I can get a service kit and parts for a 90d as I have oil coming out with the air, also anyone got any starting instructions and maintance stuff for them.
cheers john
hydrovane 90d
-
- Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: hydrovane 90d
I have done a fair bit on the Hydrovanes.
Service kits are on Ebay ,type in Hydrovane.
Starting is straight forward,from cold.Go to preheat position on the switch,older machines are fitted with a thermostart. You will se a lever on the compressor air end, ( on compressor air end body same side as start key ) pull this lever up. Go to start engine after pre heat.turn engine over till it fires,release lever on air end casing.Run for a few minutes to warm through then couple up air line and use.
Oil in air is a sign that separators need servicing,but can also be wrong grade of oil.
The air end on an 90D Hydrovane is a CWD 66.oil is Shell rotella SX 30 takes 5 ltrs
Martyn
Service kits are on Ebay ,type in Hydrovane.
Starting is straight forward,from cold.Go to preheat position on the switch,older machines are fitted with a thermostart. You will se a lever on the compressor air end, ( on compressor air end body same side as start key ) pull this lever up. Go to start engine after pre heat.turn engine over till it fires,release lever on air end casing.Run for a few minutes to warm through then couple up air line and use.
Oil in air is a sign that separators need servicing,but can also be wrong grade of oil.
The air end on an 90D Hydrovane is a CWD 66.oil is Shell rotella SX 30 takes 5 ltrs
Martyn
-
Topic author - Posts: 14
- Joined: Tue Dec 13, 2011 10:09 am
- Real name: John
- Been thanked: 2 times
- Flag:
Re: hydrovane 90d
thanks for the reply but cant find any kits for a cwd66 I will contact the firms on there and see if they do them.
cheers john
cheers john
-
- Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: hydrovane 90d
Try these
ThoriteDirect web customer support:
Email: online@thorite.co.uk
Tel: 0800 034 1811
Fax: 0800 136918
For general sales and all other enquiries:
Email: sales@thorite.co.uk
Tel: 0800 034 5850
Fax: 0800 136918
ThoriteDirect web customer support:
Email: online@thorite.co.uk
Tel: 0800 034 1811
Fax: 0800 136918
For general sales and all other enquiries:
Email: sales@thorite.co.uk
Tel: 0800 034 5850
Fax: 0800 136918
-
- Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: hydrovane 90d
Head Office
Claybrook Drive
Washford Industrial Estate
Redditch
Worcestershire
B98 0DS
United Kingdom
Telephone: +44 (0) 1527 525522
Fax: +44 (0) 1527 521140
E-mail: hydrovane.red@gardnerdenver.com
Maybe this will help
Martyn
Claybrook Drive
Washford Industrial Estate
Redditch
Worcestershire
B98 0DS
United Kingdom
Telephone: +44 (0) 1527 525522
Fax: +44 (0) 1527 521140
E-mail: hydrovane.red@gardnerdenver.com
Maybe this will help
Martyn
-
Topic author - Posts: 14
- Joined: Tue Dec 13, 2011 10:09 am
- Real name: John
- Been thanked: 2 times
- Flag:
Re: hydrovane 90d
thanks for your help martyn but still know joy they say they are to old and I wont get any parts from compair for it. any other ideas
cheers john
cheers john
-
- Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: hydrovane 90d
Contact one of the Ebay sellers,compressor man,I think he goes under. I will ask around.There is a firm near Bristol that may have old Hydrovane stock. They did have a Hydrovane 90 D for parts there.
Martyn
Keynsham Plant Services
Unit 7A / Burnett Business Pk
Gypsy Lane
Bristol
Avon BS31 2ED
Martyn
Keynsham Plant Services
Unit 7A / Burnett Business Pk
Gypsy Lane
Bristol
Avon BS31 2ED
-
Topic author - Posts: 14
- Joined: Tue Dec 13, 2011 10:09 am
- Real name: John
- Been thanked: 2 times
- Flag:
Re: hydrovane 90d
Well just like to say thanks for the help so far. I finally got round to get it striped down and got the new parts for the seperator (AAcompressorkits). next problem is getting it back together as I need to press the end cap down to be able to get the the tube with the lifting eye in. has anyone done this if so what did you use to press it down?
cheers john
cheers john
-
- Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: hydrovane 90d
http://www.ebay.co.uk/itm/Hydrovane-90DSS-Service-Repair-Parts-List-Manual-Perkins-4-Cylinder-Diesel-on-CD-/160892756622?pt=UK_Air_Tools_and_Compressors&hash=item2575f4a28e
This is the super silence later version but the air end is the same
Martyn
This is the super silence later version but the air end is the same
Martyn
Return to “Construction Equipment”
Who is online
Users browsing this forum: No registered users and 49 guests