Search found 543 matches
- Thu Sep 06, 2012 8:42 pm
- Forum: Projects
- Topic: 1938 Morris
- Replies: 5
- Views: 3210
Re: 1938 Morris
yep, great job Fred, as usual. Thanks for the pic's Mark
- Wed Sep 05, 2012 9:44 pm
- Forum: Loaders/Backhoes
- Topic: Part Numbers JCB 3C 3D MK 2 & 3 Filters
- Replies: 4
- Views: 22799
Re: Part Numbers JCB 3C 3D MK 2 & 3 Filters
This post is going to get lost isnt it
- Wed Sep 05, 2012 9:40 pm
- Forum: Loaders/Backhoes
- Topic: Hydraulic leak in JCB 3C mk II
- Replies: 26
- Views: 19416
Re: Hydraulic leak in JCB 3C mk II
not sure is there a way of finding out. Mark or is it just something i should do first. to be fare its prob not had it changed for years. cheers. Yep, Id check the strainer in the nearside tank, and replace the filter, if either or both are full of crud or have collapsed they could seriously effect...
- Wed Sep 05, 2012 9:37 pm
- Forum: Loaders/Backhoes
- Topic: Part Numbers JCB 3C 3D MK 2 & 3 Filters
- Replies: 4
- Views: 22799
Part Numbers JCB 3C 3D MK 2 & 3 Filters
Okay Guys, I'm always getting asked for these so here goes. All the numbers are original JCB Part Numbers from original JCB Manuals. Some may have been superseded, but your dealer will be able to trace the correct item with these numbers. Engine oil Filter 4/98. P/no 988/00038 Air Filter to Serial N...
- Wed Sep 05, 2012 8:51 pm
- Forum: Loaders/Backhoes
- Topic: Hydraulic leak in JCB 3C mk II
- Replies: 26
- Views: 19416
Re: Hydraulic leak in JCB 3C mk II
svkenn wrote:thanks for that! but still the same. backhoe and front laoder only works slow and when engine is on full revs. does this look like a the pump. if so any body know what it is on a 1974 jcb.
Hydro filter okay? Mark
- Tue Sep 04, 2012 8:51 pm
- Forum: Loaders/Backhoes
- Topic: JCB 3C II Hydraulic Pump
- Replies: 40
- Views: 19158
Re: JCB 3C II Hydraulic Pump
Hi anyone know where I can get a seal kit for a JCB mark 2 (2BII)? Nick Hi Nick, here we go. If your machine is a jcb 2 on a ford or BMC then the Major seal repair kit is HP/10/27/1 There is a Cessna to Plessey conversion kit which is p/no 102/89600 (if you need to replace with a later pump) If the...
- Tue Sep 04, 2012 8:32 pm
- Forum: Loaders/Backhoes
- Topic: JCB 3C II Hydraulic Pump
- Replies: 40
- Views: 19158
Re: JCB 3C II Hydraulic Pump
NickH wrote:Hi anyone know where I can get a seal kit for a JCB mark 2 (2BII)?
Nick
For???
- Tue Sep 04, 2012 8:30 pm
- Forum: Loaders/Backhoes
- Topic: JCB 3C III - buy it or leave it?
- Replies: 27
- Views: 24441
Re: JCB 3C III - buy it or leave it?
In the UK, £2000 to £2500, scrap price must be around £1800.Machine is 7 to 8 ton.If there are any issues with engine or transmission that cant be easily fixed,walk away, as you could be paying out a lot more to repair it than it would be worth. Martyn Have to agree with Martyn here. :thumbup: Mark
- Tue Sep 04, 2012 8:28 pm
- Forum: Loaders/Backhoes
- Topic: jcb 3d2 hydraclamps
- Replies: 4
- Views: 2337
Re: jcb 3d2 hydraclamps
Hi David, it is very likely the clamps are not releasing if the king post carriage has been left in the same place for years. Operate the lever as you described, then working any service on the excavator valve block should release the pressure in the clamps. You may need to lift the machine gently a...
- Fri Aug 31, 2012 7:37 pm
- Forum: Loaders/Backhoes
- Topic: Need help with Model JCB 212S parts. Year 2000. (USA).
- Replies: 6
- Views: 3154
Re: Need help with Model JCB 212S parts. Year 2000. (USA).
Hi Gar,
Welcome on board. Here's the deal. You list the serial number of your machine, and I'll list the part number. How's that?
cheers Mark
Welcome on board. Here's the deal. You list the serial number of your machine, and I'll list the part number. How's that?
cheers Mark