Fil.
According to thread data charts, 11/16" BSF is 14 TPI. Your wheel studs could be slightly below 11/16 due to wear and tear etc. Have you measured the DIA of the good studs?
Norm.
Search found 502 matches
- Wed Sep 27, 2023 10:35 am
- Forum: Dumpers
- Topic: Winget 2S wheel nut thread size?
- Replies: 12
- Views: 4872
- Flag:
- Mon Sep 04, 2023 12:42 am
- Forum: Excavators
- Topic: Hymac 580BT 1969
- Replies: 190
- Views: 151702
- Flag:
Re: Hymac 580BT 1969
Jeremy.
I've done quite a few of those worn forks and clevis pins. Fill the fork holes with weld and re drill them, and renew clevis pins. (If the facilties are handy)
Norm.
I've done quite a few of those worn forks and clevis pins. Fill the fork holes with weld and re drill them, and renew clevis pins. (If the facilties are handy)
Norm.
- Sat Sep 02, 2023 9:11 pm
- Forum: Loaders/Backhoes
- Topic: JCB 3cx
- Replies: 12
- Views: 21412
- Flag:
Re: JCB 3cx
That bend in the wheel arch took a bit of thinking about.
- Sat Sep 02, 2023 8:25 pm
- Forum: Loaders/Backhoes
- Topic: JCB 3cx
- Replies: 12
- Views: 21412
- Flag:
JCB 3cx
Hi all.
Had a couple of days tidying the floor and wheel arch on the 3cx. (off side)
The door is next. I've done the near side. (rubber carpets nightmare man)
. A few pics,one of them shows what was cut out.
I'll try to get these in order.
Norm.
Had a couple of days tidying the floor and wheel arch on the 3cx. (off side)
The door is next. I've done the near side. (rubber carpets nightmare man)
. A few pics,one of them shows what was cut out.
I'll try to get these in order.
Norm.
- Tue Aug 29, 2023 9:39 am
- Forum: Heavy Haulage
- Topic: Classic pictures Updated 20/04/2024
- Replies: 4279
- Views: 3023806
- Flag:
Re: Classic pictures Updated 28/08/2023
Rob.
Could be something other than a clay pit. The 06 shunter ( think its British Rail)And I don't think the hopper wagon(s) would have been used for clay. That is a large spoil heap and a viaduct running through the site, strange one that. Gravel might go with the Hopper wagons?
Norm.
Could be something other than a clay pit. The 06 shunter ( think its British Rail)And I don't think the hopper wagon(s) would have been used for clay. That is a large spoil heap and a viaduct running through the site, strange one that. Gravel might go with the Hopper wagons?
Norm.
- Tue Jul 11, 2023 5:28 pm
- Forum: Loaders/Backhoes
- Topic: 3CX JCB 1997 Maint. questions
- Replies: 27
- Views: 179033
- Flag:
Re: 3CX JCB 1997 Maint. questions
geckoNZ. There is a fab shop close by, they laser cut and bent the the window frames for me, done an excellent job. So how would I go about getting the info to make one If needed? I must have been lucky with my boom ram as the cap nut was barely hand tight, getting the pin out of the king post was a...
- Tue Jul 11, 2023 11:15 am
- Forum: Loaders/Backhoes
- Topic: 3CX JCB 1997 Maint. questions
- Replies: 27
- Views: 179033
- Flag:
Re: 3CX JCB 1997 Maint. questions
gecko.cx
The cad file would be a boon, but sadly I wouldn't know how to go about such technology.
Norm.
The cad file would be a boon, but sadly I wouldn't know how to go about such technology.
Norm.
- Tue Jul 11, 2023 11:07 am
- Forum: Loaders/Backhoes
- Topic: Blck cab 3CX - is the engine oil filter the same as transmission filter?
- Replies: 7
- Views: 1640
- Flag:
Re: Blck cab 3CX - is the engine oil filter the same as transmission filter?
UnclejakeNZ
That engine coolant thing bugged me for a while so I fitted a coolant temp gauge into the dash.( 3cx white ish cab)
Norm.
That engine coolant thing bugged me for a while so I fitted a coolant temp gauge into the dash.( 3cx white ish cab)
Norm.
- Wed Jun 28, 2023 10:13 am
- Forum: Loaders/Backhoes
- Topic: 3CX JCB 1997 Maint. questions
- Replies: 27
- Views: 179033
- Flag:
Re: 3CX JCB 1997 Maint. questions
gecko cx.
Great idea with the spanner.
Norm.
Great idea with the spanner.
Norm.
- Sat Jun 17, 2023 6:39 pm
- Forum: Loaders/Backhoes
- Topic: JCB 3cx
- Replies: 3
- Views: 2275
- Flag:
Re: JCB 3cx
Hi all.
I had these bottom side window frames fashioned from a local fab shop they're an excellent copy considering what I gave him as a template. Pics include old and new. They're made in two pieces either side and will be plug welded together. ( same as original I think).
I had these bottom side window frames fashioned from a local fab shop they're an excellent copy considering what I gave him as a template. Pics include old and new. They're made in two pieces either side and will be plug welded together. ( same as original I think).