The Classic Machinery Network

On the old 1950's and 1960's machines which had power assisted steering with the Hydrosteer ram operated using the tractor link arm the steering wheel shaft was different as it depended on the base tractor steering box I.e fordson, Nuffield etc. They then changed to full power steering which uses an...

Hi Im waiting for the weather to improve but will start letter this month but in the meantime I've been gathering parts for it and have a new boom ram cover made and a set of hoses on order. Next week will probably get a new excavator bucket made for it

Hi I weighed my 3C III on the weigh bridge at JCB and have a print out of the weight so can provide all the details you require on JCB headed paper

Regards Julian

Hi I put my 3C on the weighbridge at JCB and have the print out for it. If you tell me what you need I can provide this on Jcb headed paper

Regards Julian

I also always fill it via the tank breathers as its so slow through the filter

I have a spare orbital valve and new steering pump if required

Hi, I get asked a lot about the paint and I can get the original colour red and yellow and think I still have some left over from my 3C restoration. Please PM me
regards Julian

underneath the floor plate at the back of the brake pedal is a proximity switch which if faulty unscrewed to be replaced, There are two wires one the feed and the second then goes to the rear lights

Hi Richard I have all the details of the wiper arms and motors and have new spares also wiring harnesses . Give a call as I'm sure I have everything you will need

Hi Richard I have some new chrome lights and the later ones with plastic covers. Send me a pm