Search found 500 matches

by mechman
Thu Feb 15, 2024 12:09 pm
Forum: Loaders/Backhoes
Topic: JCB 3cx
Replies: 12
Views: 20667
Flag: Great Britain

Re: JCB 3cx

Agrimax.
Gotcha. :thumbup:
Norm.
by mechman
Wed Feb 14, 2024 11:40 am
Forum: Loaders/Backhoes
Topic: JCB 3cx
Replies: 12
Views: 20667
Flag: Great Britain

Re: JCB 3cx

Pete. It's a different set up to the old 3Cs.( It would be) It has some kind of linkage at the bottom of the operating lever that slides a thingy in the valve block.It can be attached in several positions, don't know if that makes a difference. I'm going to try cracking a hose to determine the press...
by mechman
Wed Feb 14, 2024 1:46 am
Forum: Loaders/Backhoes
Topic: JCB 3cx
Replies: 12
Views: 20667
Flag: Great Britain

Re: JCB 3cx

Pic.
by mechman
Tue Feb 13, 2024 8:15 pm
Forum: Loaders/Backhoes
Topic: JCB 3cx
Replies: 12
Views: 20667
Flag: Great Britain

Re: JCB 3cx

Hi all. A little info required if possible. My JCB 3CX has a carriage that seems to be stuck in the middle of the rails. The operating lever was seized solid. I had to remove it from the machine to free it. Now that it's free it still doesn't work.Does the lever have to be pushed away from driver or...
by mechman
Sat Feb 03, 2024 9:19 pm
Forum: Dumpers
Topic: Petter PH1 - spill timing and rack position...
Replies: 13
Views: 1330
Flag: Great Britain

Re: Petter PH1 - spill timing and rack position...

Thanks Norm. Where am I measuring the 11/16 between? Is that the distance between the calibration mark and the spot face when the screw on the governor arm is just touching the end of the rack spindle? And is that with the governor fully forward (away from the flywheel) or fully back (towards the f...
by mechman
Sat Feb 03, 2024 8:29 pm
Forum: Dumpers
Topic: Petter PH1 - spill timing and rack position...
Replies: 13
Views: 1330
Flag: Great Britain

Re: Petter PH1 - spill timing and rack position...

Thanks Norm. Where am I measuring the 11/16 between? Is that the distance between the calibration mark and the spot face when the screw on the governor arm is just touching the end of the rack spindle? And is that with the governor fully forward (away from the flywheel) or fully back (towards the f...
by mechman
Sat Feb 03, 2024 11:18 am
Forum: Dumpers
Topic: Petter PH1 - spill timing and rack position...
Replies: 13
Views: 1330
Flag: Great Britain

Re: Petter PH1 - spill timing and rack position...

Fil .
I think the 13/16" is the no gap setting between the governor arm and the end of the rack spindle, then you go on to set the spill timing at the 1/2" setting. I'm pretty sure it's the governor setting that's at fault.
Norm.
by mechman
Fri Feb 02, 2024 12:20 pm
Forum: Dumpers
Topic: Petter PH1 - spill timing and rack position...
Replies: 13
Views: 1330
Flag: Great Britain

Re: Petter PH1 - spill timing and rack position...

Fil.
If you go on The David Cornwallis site, PH engines, work shop manual, page 3.12 onwards all the info is there. I've done them myself PH2 but memories a bit hazy now. Hope this helps.
Norm.
by mechman
Wed Jan 31, 2024 10:14 pm
Forum: Excavators
Topic: JCB3D || color rall
Replies: 10
Views: 2657
Flag: Great Britain

Re: JCB3D || color rall

Vasilmadjarov
Could you translate to English please.
Norm.
by mechman
Mon Jan 29, 2024 11:08 am
Forum: Heavy Haulage
Topic: Classic pictures Updated 17/03/2024
Replies: 4243
Views: 2961334
Flag: Great Britain

Re: Classic pictures Updated 27/01/2024

Agree with the Drott, who needs air con.

Go to advanced search