Search found 543 matches

by Mark.Rive
Mon Jan 30, 2017 9:51 pm
Forum: Loaders/Backhoes
Topic: 3C2 Cutting out? - Fuel Tank?
Replies: 17
Views: 2480

Re: 3C2 Cutting out? - Fuel Tank?

No problem, hope you get her sorted :thumbup:
by Mark.Rive
Mon Jan 30, 2017 9:50 pm
Forum: Excavators
Topic: jcb 806
Replies: 8
Views: 1707

Re: jcb 806

I'll defo have a data sheet for it, Let me hunt around through my old computer, see what I come with :D
by Mark.Rive
Sun Jan 29, 2017 8:08 pm
Forum: Loaders/Backhoes
Topic: 3C2 Cutting out? - Fuel Tank?
Replies: 17
Views: 2480

Re: 3C2 Cutting out? - Fuel Tank?

Image

You can just see the fuel sender in this picture, above the steering box :)
by Mark.Rive
Sun Dec 18, 2016 6:31 pm
Forum: Loaders/Backhoes
Topic: JCB 3C 11 steering leak
Replies: 6
Views: 1648

Re: JCB 3C 11 steering leak

Hi, welcome to CMN. There were 2 types of steering units, Danfoss and Plessey, if you go to the downloads section at the top of the page, look for JCB, click on "JCB" then look for the workshop manual for your machine. All the details you need regarding both units are there. Good luck Mark...
by Mark.Rive
Tue Dec 13, 2016 8:47 pm
Forum: Loaders/Backhoes
Topic: JCB 3C Mark III fuel tank success !
Replies: 7
Views: 2467

Re: JCB 3C Mark III fuel tank success !

Oops,
just re read your post.

For the temp gauge, use the same green wire that's feeding the fuel gauge from fuse one.( Just piggy back off either gauge to the other), Earth obviously aswell. The temp sender wire would have been blue with a green tracer. :)
by Mark.Rive
Tue Dec 13, 2016 8:40 pm
Forum: Loaders/Backhoes
Topic: JCB 3C Mark III fuel tank success !
Replies: 7
Views: 2467

Re: JCB 3C Mark III fuel tank success !

Hiya, fuel gauge wiring as follows. The Sender is earthed through the tank if it just has one terminal one it. (Thats factory installed) A green wire with a black tracer would route from the fuel gauge sender to the "sender" terminal on the fuel gauge. At the fuel gauge, the two other term...
by Mark.Rive
Fri Dec 09, 2016 9:09 pm
Forum: Tech Talk
Topic: My poorly 3c Mk2
Replies: 9
Views: 2598

Re: My poorly 3c Mk2

The proper workshop manual for your machine is available in the downloads section at the top of the page :) Mark
by Mark.Rive
Tue Dec 06, 2016 10:26 pm
Forum: Loaders/Backhoes
Topic: JCB 3D II Hydraulic issues
Replies: 10
Views: 4246

Re: JCB 3D II Hydraulic issues

Great new's Jeremy, now I'm off to look at your project :) Mark
by Mark.Rive
Tue Dec 06, 2016 9:42 pm
Forum: Loaders/Backhoes
Topic: JCB 3D II Hydraulic issues
Replies: 10
Views: 4246

Re: JCB 3D II Hydraulic issues

Hi Jeremy, Yes, it's been a while for sure!
All good with me thanks, hope you and your's are fine too! :)
by Mark.Rive
Mon Dec 05, 2016 9:24 pm
Forum: Loaders/Backhoes
Topic: JCB 3D II Hydraulic issues
Replies: 10
Views: 4246

Re: JCB 3D II Hydraulic issues

Cracking looking 3DMKII there, parallel arm's to :)
When checking the hydro oil level, if you can see the sight glass, it should be 2 3rd's full. With the machine in the travelling position. I.E as if you were about to drive off :thumbup:

Go to advanced search